Kitchen Vent Upgrade

by Greg Zimmerman

The old style kitchen vent had turned yellow and looked dated.  Newer Casitas use the JR Endura vent which looks better, and has better latches to keep it closed while trailering.

Yucky old yellowed vent

Upgrade time!  After removing the old vent, the fiberglass had to be opened up, as the new one is just a shade bigger.  A cut-out tool with a roto-zip bit did the job.  You can also use a jig saw.

On my camper, the duct work intruded into the bezel of the new vent, so I used the cut out tool to notch both sides for clearance.

The new vent was put in, new holes were drilled, sealant caulked around opening, and I riveted the vent into place.

With the cover slid on, the result is a much smoother look that won’t yellow in the sun.

Here’s the vent available on amazon, just click the image.



Chris Paegelow October 20, 2019 - 10:41 pm

I’m just about to do this same project! What size rivets did you use? The rivets on my old cover look like 1/8″, but do you know what grip length? Thanks!!

Greg Zimmerman October 25, 2019 - 7:22 am

Mine were 3/16″ and I use a long grip length- about 3/4″.

louis mendoza June 30, 2020 - 11:16 am

how did you get the rivets out

Greg Zimmerman June 30, 2020 - 11:46 am

3/16″ drill bit


Leave a Comment